User's Manual

http://www.woosim.com
29
③ WPA.
X Note
- WPA-PSK : Input more than minimum 8 byte.
2.5. Setting WEP key.
Check the settings of AP to connect to (authenticate method – open, shared key;
key length – 64 bits, 128 bits and key index).
1) Click the [WEP] menu
2) Select an Authentication method – [Open System] / [Shared Key]
3) Select a WEP key length – [64 Bits] / [128 bits]
4) Select a key index to use – [Key1] / [Key2] / [Key3] / [Key4]
5) Select key format to input – [HEX] / [ASCII]
6) Input the Key.
7) The following is an example.