User's Manual
WSP-i350 Rev. 4.1
http://www.woosim.com
21
When you press FEED button once.
You will see present Quality mode in the LCD. (Low)
Press POWER Button once. And then the quality has set to Quality high.
When you press FEED button once.
You will see present MARK mode in the LCD. (Use)
Press POWER Button once. And then the mark has set to Mark no use.
When you press FEED button once.
You will see present SENSOR mode in the LCD. (High)
Press POWER Button once. And then the sensor has set to
Sensor Low.
When you press FEED button once.
You will see present POWER DOWN mode in the LCD. (5 min Off)
Press POWER Button once. And then the Power down has set to
Power down no use.
If all the mode have set, press the POWER Button and the FEED Button
at the same time. After then release the buttons at the same time.
Bluetooth / 57600bps / 7 data bit / Odd parity / 2 stop bit / Density high /
Quality High / Mark No use / Sensor Low / no use