User’ s Manual WOO YOUNG Telecom CO.,LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Contents ································ 3 ························· 3 ····································· 4 ························ 7 ········································ 8 1. Before Setting up Brief Specification of LCD Monitor Precautions Instruetion for Cleaning the Monitor 2. Items 3.
TV ·········································· 21 ······································· 21 Channel 5. Appendix ····································· 22 Appendix A. Display Modes ························· 22 Appendix B. 15-pin D-Sub Connector ····················· 23 ···························· 24 ································ 25 DPMS Power Saving Mode 6.
1 Before setting up This is 15.0 inch TFT-LCD monitor. Before setting up the LCD Monitor, please read this manual to help your understanding of the LCD Monitor. Brief Specification of LCD Monitor ● ● ● ● ● ● Resolution : 15.0 inch XGA (1024 X 768@75Hz) Color display : 16,777,216 colors DPMS (Display Power Management Signaling) OSD (On Screen Display) Auto Configuration : Hot key DDC 1/2B : Plug & Play Notice According to PC system, DDC 1/2B may not be supported.
Precautions Warning : The following information will help you avoid the risk of electric shock, serious injury, and death. Power cord AC outlet Plug the power cord into a properly grounded outlet. There is the risk of electric shock. If you hear a noise or smell smoke from the computer or adaptor, unplug the power cord immediately, and call the service center. There is the risk of electric shock or fire. Do not overload an electrical outlet with too many devices. There is the risk of fire.
Do not expose the monitor to the direct sun light. Keep the monitor away from high temperature, humidity, and dust. ■ Operating environment= 0~ 40degrees Celsius ■ Operating environment= 30~ 80relative humidity. Do not block the fan louvers. There is the risk of fire or damage to the monitor. Do not allow any object or liquid to enter inside the monitor. There is the risk of electric shock, fire, or damage to the monitor. Do not attempt to disassemble, fix, or modify the monitor.
Caution : The following information will help you avoid the risk of minor or moderate injury, or damage to the monitor. Use a proper voltage/current level indicated Do not clean the LCD with abrasive chemicals. There is the risk of damage to the LCD. Do not scratch and damage the LCD with sharp objects. Keep the monitor away from objects and electrical appliances that may generate electromagnetic fields. Place the monitor on a flat, stable surface.
Instruction for Cleaning the Monitor Make sure the power cord is unplugged. Do not spill or pour liquid on the monitor. ● Cleaning the LCD panel 1. Use a clean, soft cloth to wipe off dust from the LCD. 2. If still not clean, wipe the LCD with a clean soft cloth with a small amount of glass cleaner? without alcohol or ammonia. ● Cleaning other parts of the monitor 1. Use a clean, soft cloth to wipe off dust from the monitor. 2.
2 Items User Manual LCD Monitor DC Adapter 15-pin D-Sub Signal Cable 8
Notice RCA Cable Audio Cable S-Video Cable External TV Box Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.
3 Setting up the LCD monitor Where is a good place to position the monitor? Place the LCD monitor on a solid and flat surface. If dropped, the screen can be damaged easily.
How to connect the power cord and the several cables to the LCD monitor. No. Name Cable connections No.
Connecting Your LCD Monitor ● Connecting your PC system 1. Connect the 15-pin D-Sub Signal Cable from PC to No.4. 2. If you use a speaker, connect the Audio Cable from PC to No.1. 3. If you use a headphone and earphone, connect the Headphone Cable from PC to No.2. ● Connecting your AV(DVD, VIDEO, CAMCODER) & TV 1. Connect the DVD/VCR Cable from PC to No.6, No.7 and No.8. 2. Connect the external TV box cable to NO.10. 3. Connect the S-Video cable to NO.9.
Connecting for TV ● Connect the external TV Box to Monitors Ext. jack ● Connect the antenna cable to the external TV Box from wall antenna jack same as the below the picture Plug & Play The adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display.
4 Adj usting The Monitor The Function Control Buttons How to use the function Key. You can change the display bnode (PC → Video → S-Video → TV) 1. First click : The OSD main menu appears. 2. Second click : The OSD menu disappears. 1. Select a command function. 2. When you push Auto button, this will optimize image quality automatically. Volume On/Off button.
Move the on-screen highlighted command item to the next one. 1. You can adjust the volume 2. Increase / Decrease the current option value. Power On/Off toggle button.
Main OSD Menu When you push the menu button, you can see below main OSD menu. PC Menu 1024 X 768 48.
COLOR ● ● ● ● The tone of color can be changed form bluish white to reddish white. Color1 - Blue type Color2 - Red type RED, GREEN, BLUE - You can adjust red, green and blue values that you want. Color COLOR 1 COLOR 2 USER COLOR 1024 X 768 48.
OSD FUNCTION Sets the OSD menu display position. H-Position : Moves the OSD menu to the horizontal direction. V-Position : Moves the OSD menu to the vertical direction. Language : Select OSD language. (English, Espanol, Francais, Deutsch, Italiano) Off timer : OSD display time.
VIDEO Apply Video function to Monitor.
Color • COLOR : Adjust color intensity of the VIDEO. Color COLOR TINT SHARPNESS EXIT 20 • TINT : Adjust a color tone of the VIDEO. • SHARPNESS : Make image of the VIDEO looked sharper.
TV TV Menu Channel: TV의 채널을 수신합니다. Channel • AIR/CATV : Select AIR or CATV. Channel AIR/CATV AUTO. SEARCH MANUAL SETTING FINE ADJUSTM ▶ ▶ ▶ ▶ CATV STOP 15 ADD 0 • AUTOSEARCH: Search the channel automatically. (SELECT button button : select channel SELECT button (ADD/DEL)) • MANUAL SETTING : Search the channel manually. • FINE ADJUSTM : Adjust image quality of the TV. The mode button can adjust lnput Source by hot key. 주의 In this case, the mode change time spend 2~3sec.
5 Appendix Appendix A. Display Modes Mode Resolution 720 X 400 Horizontal Vertical Pixel Clock Sync Frequency(KHz) Frequency(Hz) Frequency(MHz) Polarity(H/V) 31.468 70.087 28.322 -/+ 31.468 59.940 25.175 -/- 35.000 66.670 30.240 -/- 37.500 75.000 31.500 -/- 37.879 60.300 40.000 +/+ 48.077 72.188 50.000 +/+ 46.875 75.000 49.500 +/+ 48.363 60.004 65.000 -/- 56.476 70.000 75.000 -/- 60.023 75.029 78.
Appendix B. 15-pan D-Sub Connector ● Input signal : Analog RGB ● 15-pin D-Sub connector Pin No. Signal Name Pin No. Signal Name Pin No.
Appendix C. DPMS Power Saving Mode This monitor has a built-in power management system called DPMS Power Saving Mode. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. The available modes are “ON”, “Standby”, “Suspend”, and “OFF”.
6 Troubleshooting What you see Suggested Actions Screen is blank and power indictor is off Ensure that the power cord is firmly connected and the LCD monitor is on. “out of range” message • Check the maximum resolution and the frequency of the video adaptor. • Compare these values with the data in the Display Modes Timing Chart. “No signal input” message • Ensure that the signal cable is firmly connected to the PC or video sources. • Ensure that the PC or video sources are turned on.
26
Appendix A. Specifications Type Panel Size Pixel Pitch Display Color Basic Display Resolution Maximum Horizontal Frequency Vertical Sync Signal Connectors Tilting Degree (U/D) Plug&Play Input Output Power Consumption Standby mode Power Management Temperature Environmental Consideration Humidity Outside Dimensions Monitor Weight Carton TFT active matrix 15 inch 304.1mm× 228.1mm 0.297mm× 0.297mm 8-bit (16,777,216 colors) 1 0 2 4× 7 6 8 @ 6 0 H z 1024× 768@75Hz 31.5~60KHz 56~75Hz TTL, P. or N.
WOO YOUNG Telecom CO.,LTD. http://www.wyt.co.
