HL S HL S HL S User’s Reference High Resolution TFT LCD Monitor DAEWOO INTERNATIONAL Corp. http://www.daewoo.com P/N : 97E9500149 DAEWOO INTERNATIONAL Corp.
Contents 1. Precautions 2 2. Items 4 3. Setting up the LCD monitor 5 How to connect the power cord and the several cables to the LCD monitor. 5 Plug & Play 5 Warm-up Time 5 4. Adjusting The Monitor 6 The Function Control Buttons 6 How to use the Function Key. 6 Main OSD Menu 6 BRIGHTNESS/CONTRAST 7 COLOR 7 POSITION &CLOCK/PHASE 7 OSD FUNCTION ADJUSTMENT 7 SETUP MENU 7 5. Appendix 8 Display Modes 8 15-pin D-Sub Connector 9 DPMS Power Saving Mode 9 6.
1 Precautions Warning : The following information will help you avoid the risk of electric shock, serious injury, and death. Power cord AC outlet Plug the power cord into a properly grounded outlet. There is the risk of electric shock. If you hear a noise or smell smoke from the computer or adaptor, unplug the power cord immediately, and call the service center. There is the risk of electric shock or fire. Do not overload an electrical outlet with too many devices. There is the risk of fire.
2 3 Items Setting up the LCD monitor How to connect the power cord and the several cables to the LCD monitor. User Manual LCD Monitor Power cord No. Name Cable connections 1 Power Power Cord 2 PC 15-pin D-Sub Signal Cable Plug & Play 15-pin D-Sub Signal Cable Notice 4 Stand ※Push the hook until hanging Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.
4 BRIGHTNESS/CONTRAST Adjusting The Monitor ● Brightness : Changes the overall light intensity of the images being displayed. ● Contrast : Changes the ratio of light intensity between the brightest white and darkest black. ● Gamma : Change the gamma value. The Function Control Buttons Adjusting Gamma Value is useful in case of game or movie screen. Notice COLOR ● ● ● ● How to use the Function Key. The tone of color can be changed form bluish white to reddish white.
5 Appendix Display Modes Mode Resolution 720 X 400 15-pin D-Sub Connector Horizontal Vertical Pixel Clock Sync Frequency(KHz) Frequency(Hz) Frequency(MHz) Polarity(H/V) SVGA XGA SXGA 800 X 600 1024 X 768 1280 X 1024 Pin No. Signal Name Pin No. Signal Name Pin No.
6 Troubleshooting What you see Suggested Actions Screen is blank and power indictor is off Ensure that the power cord is firmly connected and the LCD monitor is on. “out of range” message �Check the maximum resolution and the frequency of the video adaptor. �Compare these values with the data in the Display Modes Timing Chart. “No signal input” message �Ensure that the signal cable is firmly connected to the PC or video sources. �Ensure that the PC or video sources are turned on.
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC FULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITION: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
