User Guide

ManualsBrandsWorallymy ManualsOtherWorallymy F1 True Wireless Stereo Earphone

Easy pairing connection

①

②

The earphoneis taken out of the package and placed in the charging

compartmentThe earphone is charged and activated,blue light on

The earphone is taken out from the chargingcompartment, the LR earphone

ﬂashens Blue/Red, the R side fiashes and the L side light is oﬀ, that means the pairing is

successful.

③ Open the phone wireless

Search wireless name:F1

Click Connect

④,

⑤

Afterthe headset is used put it directly into the charging box and the

turns oﬀ

To use the

headset

headset again, simply remove the headset from the charging

box.

The headset will automatically complete the binaural pairing and connect

the phone.

Carging schematic

Wear schematic

Wireless 5.0More compatible

Compartible with Apple IOS and Android smartphones

One button control-

Double click next song

Three click:volume +

Double click previous song

Three click:volume -

Theheadset 4 clickstoswitch thegame mode(the light is alwayson during thegame mode),4 clicks

again toswitch themusic mode

Long press4seconds

Power OFF

Long press2

seconds

In Standby state:activate Siri

In Poweroﬀ state:Power on

When calling comes: reject call

Shortpress

Play/Pause/Answer/Hang up

Function button

Android

IOS

Indicator light

Wireless

connected

①

Note:lf the left and right earphones are not connected within 5 minutes, the

earphone will automatically shut down, if you need to use them,pleass restart

them

Up to

Cally/play: about 5

standby: about 150

hours

times:

Moblie charging

When charging:the blue light is always on

Full power: the blue light is oﬀ

Charging time: about 1 hour

When charging:White light flashing

Full power: white light is always on

Charging time: about 1 hour

Charge theearphone inthe charging

compartment. Theblue lightis on.

Theearphone is fullycharged and thelight goes out.

The chargingcompartmentislow and theblue lightﬂashesout.

Charging box

Note:When charging the product charging box, please use our standard

charging cable,5V/1A charger.

Special Note: Do not use more than 5V/1A fast charge charger, so as not to

damage the charging box!

Headset

Product schematic diagram

Power button

Indicator light

Midhead Port

Magnetically sucition charger

()

‘

Wireless headset

left and right

Headet power box

USB charging cable

User s Guide

Beautiful packaging

Packing Lit

USB charging port

Ear storage bin

Product speciﬁcations

Wireless connection name F1

Wireless version 50

Prwer lnput: DC 5V

Headset Battery capacity: 3.7V/40mAh

Call/ play time: about 5 hours(Hours)

Charging time: about 60 minute(Min)

Charge box battey capacity: 3.7V/ 300 mAh

Support agreement: HSP / HFP / A2DP / AVRCP

Sensitivity: 1205

Frequency response range 20 20000Hz

Impedance: 32

Product Name: F1

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

this device may not cause harmful interference,and

this device must accept any interference received, including interference

that may cause undesired operation

①

②

This device has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

device generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this device does cause harmful interference to

radio or television reception, which can be determined by turning the device off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit diﬀerent from that to which the

receiver is

connected.

--Consult

the dealer or an experienced radio/TV technician for help

Changes or modiﬁcations not expresslyapproved by the party responsible for

compliance could void the user's authority tooperate the equipment

FCC ID: 2A7NUBWGH0701