Instruction manual

Important addendum
Secondary Heat Exchanger
Replacement Seal
These instructions must be read in conjunction with the installation &
servicing instructions supplied with the appliance.
For use on appliances: Greenstar Heatslave, Greenstar Danesmoor & Greenstar Camray Condensing oil fired boiler ranges.
CAUTION: Isolate the water, electricity and oil mains supplies before starting any work and
observe all relevant safety precautions.
RUBBER SEAL
IMPORTANT: Do not fit the brass
inserts
into the rubber seal when
used in the rear position.
8 7
16 113 453a 02/07 SECONDARY HEAT EXCHANGER REPLACEMENT SEAL
W
orcester
, B
osch Group. Cotswold Way, Warndon, Worcester WR4 9SW. Tel. [phone] Fax. [phone]
Worcester, Bosch Group is a trading name of BBT Thermotechnology UK Ltd. www.worcester-bosch.co.uk
RUBBER SEAL
IMPORTANT: The brass inserts must only be
used
when the seal is fitted on the front of the
secondary heat exchanger to the flue manifold
interface.
SECONDARY
HEAT EXCHANGER
BRASS INSERTS
Push the brass inserts into the
rubber seal before fitting it.
Only when fitting seal to the
flue manifold int
erface.
FLUE MANIFOLD
W
AS
HERS
These must be fitted.