Instruction manual

REFITTING COMPONENTS
INSTALLATION & SERVICING INSTRUCTIONS FOR WORCESTER GREENSTAR CAMRAY EXTERNAL &
EXTERNAL SYSTEM 12/18-18/25-25/32
8 716 115 667a (05.2009)
28
INSTALLATION
REFITTING COMPONENTS
D
A
B
C
E
1 Align burner combustion head into boiler
collar.
 Locate the combustion head into the
combustion chamber door, push the burner
firmly onto the door and secure with
retainer (A).
 Check that the burner is seated correctly
on its mounting flange and that the oil
hose/s are not trapped in front of or
underneath the burner.
 Refit the deflector plate (B) and secure
with screws (C). Ensure that the flexible oil
hose/s are not positioned between the
deflector plate and the combustion
chamber door.
 Attach air duct and tighten clip (D) to
secure to the burner air intake.
2 Plug burner lead (E) into control box (F).
1
F
2
E
CAMRAY EXTERNAL REGULAR SHOWN