PCA 240 USB User Manual Rev 1.
EN SAFETY RELATED SYMBOLS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN OR HUMIDITY. DO NOT REMOVE COVER. THIS PRODUCT IS NOT INTENDED FOR USE OTHER THAN STATED. GRAPHICAL SYMBOLS EXPLANATION This symbol, wherever used,alerts you to the presence of un-isulated and dangerous voltages within the product enclosure. These are voltages that may be sufficient to constitute the risk of electric shock.
EN FRONT PANEL 3 4 5 6 8 2 9 1 1. 2. 3. 4. 5. 6. Power On / Off Indicator LED 7. Power On / Off switch 8. Zone paging select switches 9. USB/SD Interface Input 1 - 5 Volume Control Master Tone Control (Bass) Master Tone Control (Treble) Master Volume Control Output level indicator LED REAR PANEL 10 11 18 12 13 14 15 17 16 19 20 21 22 23 24 25 10. Chime on/off switch 11. Input 2-5 (Line/Phantom/Mic) selector switch 12. Loudspeaker output terminals 13. Zone output terminals 14.
EN INSTALLATION NOTES At all times, the amplifier has to be operated under appropriate conditions. This includes that the operation location provideS sufficient ventilation and the device is not exposed to direct sunlight or direct radiation or reflection from any heat source. Installing the loudspeaker systems choose a location that is not affected by extreme and / or constant vibration or other mechanical oscillation.
EN USB/SD INTERFACE DIGITAL AUDIO PLAYER /RECORDER VOL SD MMC REC VOL RPT SD USB This interface allows to play MP3/WMA files from USB port or SD card slot. Changing the source only requires pushing one button. The information is shown in the LCD display, allowing navigation through folders and files. It incorporates volume control and REPEAT function. The interface includes a recorder function, allowing to save the mixing information or messages into SD card or USB driver.
EN CONNECTIONS Mains Connection (25) The supply transformer has been designed for use on either 115V AC or 230 V AC, selected by this slide switch on the rear panel (17). The amplifier is factory set at 230 V AC mains voltage. Input Connection Inputs 2~5 incorporate balanced standard COMBO sockets (1/4” stereo jack, and XLR 3P) on the rear panel.
EN Chime On/Off Switching on the manual chime on/off (10) switch on the rear panel and the priority conditions, chime function will be activated ( “Ding-Dong” pre-announcement chime) when the priority override is activated. The default volume of the chime is pre-set at the factory and should be suitable for most applications. Power In & Pre Out (21-22) These sockets connect the mixer/preamplifier stage to the power amplifier stage.
EN Zone Output Terminals (12) The PCA 240 USB can feed four different 100V line zones. Connect the speakers for each zone using the 3 common terminals and the corresponding zone terminal (see drawing). COM Z4 Z3 Z2 Z1 0 100V 0 100V 0 100V 0 100V After connecting the load to the selected zone, push that zone’s ZONE SELECT push button (8) in order to activate it The selected zone button will light. You can select any number of zones.
EN TECHNICAL SPECIFICATIONS Output Power (Rated) 240 W Output Power (Max.) 300 W Audio Inputs USB/SD Interface 4 MIC/LINE, 1 LINE (CD/Tuner/Tape/Aux) level MP3/WMA formats INPUTS MIC (Impedance/Sensitivity) 600 Ω / 2.
Important Warranty Information WORK pro CA products are exclusively distributed in Europe by Yamaha Music Europe GmBH. Siemensstrasse 22-34 D-25462 Rellingen, b.
