User Manual

ManualsBrandsWork Sharp ManualsHand ToolsWork Sharp Knife & Tool Sharpener Ken Onion Edition - sharpening angles from 15° to 30°, flexible abrasive belts, variable speed motor, multi-positioning sharpening

Hub Fastener

(Left-Handed Thread)

Ball

Detent

Platen Grind

Slack Grind

Quick Lock

Tensioner

(A)

(B)

Pulley Drive Hub

Quick Start Guide

Tool Grinding Attachment

Get to Know Your Tool:

Installation: Sharpening:

Belt Information:

1. Install Pulley Drive Hub onto tool using provided

Left-Hand Thread Hub Fastener – turn LEFT to tighten and

RIGHT to loosen, do not over-tighten fastener. Be

sure the Pulley Drive Hub is properly aligned onto the

keyed motor shaft.

2. Install metal Tool Grinding Attachment onto power

platform at Position A. Press FIRMLY inward to depress

ball detent, then rotate forward to Position B.

3. Push in and turn tensioner to install / uninstall belt.

• Avoid overheating tool.

- Allow tool to cool to room temperature

between rated operating periods.

• Speed Setting: Use at full speed for

optimum performance.

• Always secure work piece and wear eye

protection when grinding.

• Keep tool and attachment clean for

optimum life and performance.

Push lock release

lever and rotate knife

sharpening cassette

to position shown.

Pull outward to

remove cassette.

Extra Coarse | P60

The P60 Zirconia Alumina belt

from Norton is designed and

intended for grinding tasks.

Deburr Pipe

Sharpen a

Mower Blade

Video Demos and Replacement Belts Available at:

WORKSHARPTOOLS.COM

Summary of content (2 pages)

PAGE 1
Quick Start Guide Video Demos and Replacement Belts Available at: WORKSHARPTOOLS.COM Tool Grinding Attachment Get to Know Your Tool: Installation: Sharpening: Push lock release lever and rotate knife sharpening cassette to position shown. Pull outward to remove cassette. Sharpen a Mower Blade (A) Deburr Pipe • Avoid overheating tool. (B) - Allow tool to cool to room temperature between rated operating periods. • Speed Setting: Use at full speed for optimum performance.
PAGE 2
Safety Information: KNIFE & TOOL SHARPENER Use only as directed in Work Sharp User’s Guide. Warning: To minimize the risk of injury, always use proper eye and respiratory protection. Tool Grinding Attachment WARNING: This product contains a chemical known to the State of California to cause cancer. Some dust created by power sanding and grinding as well as contents from the machine may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.