Use and Care Manual

Kit Contents:
• 57 Pcs Titanium Coated Drill Bits- 3/64"x6, 1/16"x6,
5/64"x6, 3/32"x6, 7/64"x6,
1/8"x7, 9/64"x4, 5/32"x4, 11/64", 3/16"x4, 13/64",
7/32"x3, 15/64", 1/4"x2
• 30 Pcs Black Oxide Drill Bits- 3/64"x3, 1/16"x3,
5/64"x3, 3/32"x3, 7/64"x3, 1/8"x4, 9/64"x3,
5/32"x4, 7/32"x2, 1/4"x2
• 17 Pcs Black Oxide Brad Point Drill Bits- 1/8"x4
5/32"x4, 3/16"x3, 1/4"x2, 9/32" ,5/16"x2, 3/8"
• 4 Pcs Spade Bits- 1/2", 3/4", 7/8", 1"
• 1 Pc Spade Bit Extension-6"
• 21 Pcs Masonry Drill Bits-1/8"x2, 5/32"x2,
11/64"x2, 3/16"x2, 7/32"x2, 1/4"x3, 17/64"x2,
9/32"x3, 5/16", 11/32", 3/8"
• 4 Pcs Drill Stoppers-1/8", 3/16", 1/4" ,5/16"
• 66 Pcs 1" Power Bits-
- 10 Pcs Slotted: 1/8"x2, 5/32"x2, 3/16"x2,
1/4"x2, 9/32"x2
- 12 Pcs Phillips: #0x2, #1x3, #2x4, #3x3
- 12 Pcs Pozi: #0x2, #1x3, #2x4, #3x3
- 8 Pcs Star: T10, T15, T20, T25, T27, T30, T35, T40
- 6 Pcs Inch Hex: 5/64", 3/32", 1/8", 5/32", 3/16",1/4"
- 6 Pcs Metric Hex: H2, H2.5, H3, H4, H5, H6
- 12 Pcs Square: #0x2, #1x3, #2x4, #3x3
• 30 Pcs 2" Drive Bits-
- 4 Pcs Slotted: 1/8", 5/32", 3/16", 1/4"
- 7 Pcs Phillips: #1x2, #2x3, #3x2
- 7 Pcs Pozi: #1x2, #2x3, #3x2
- 4 Pcs Star: T15, T20, T25, T30
- 4 Pcs Metric Hex: H3, H4, H5, H6
- 4 Pcs Square: #1, #2x2, #3
• 6 Pcs Nut Drivers- 1/4", 9/32", 5/16", 11/32", 3/8", 7/16"
• 2 Pcs Hex Keys- 3/32"x2
• 1 Pc Counter Sink
• 4 Pcs Hole Saws- 1-1/4", 1-1/2", 1-3/4", 2-1/8"
• 1 Pc Arbor Adaptor For Hole Saws
• 1 Pc Center Punch
• 1 Pc Magnetic Bit Holder 2-1/4"
33176
Limited Manufacturer Warranty
FOT makes every effort to ensure that this product meets high quality and durability
standards. FOT warrants to the original retail consumer a 1-year limited warranty
from the date the product was purchased at retail and each product is free from
defects in materials. Warranty does not apply to defects due directly or indirectly
to misuse, abuse, negligence or accidents, repairs or alterations, or a lack of
maintenance. FOT shall in no event be liable for death, injuries to persons or
property, or for incidental, special or consequential damages arising from the
use of our products. To receive service under warranty, the original manufacturer
part must be returned for examination by an authorized service center. Shipping
and handling charges may apply. If a defect is found, FOT will either repair or
replace the product at its discretion.
DO NOT RETURN TO STORE
For Customer Service:
Email: [e-mail] or Call 1-800-348-5004
246 PIECE DRILL & DRIVE BIT KIT
WITH CARRYING CASE