Gemini Arm Slide Kit Model #2421-22TG and #2421-17TG Installation Instructions WorkRite Ergonomics 1450 Technology Lane Petaluma, CA 94954 ph: 800.959.9675 fx: 800.930.8989 www.workriteergo.
Gemini Arm Slide Kit Installation Instructions Contents 2 Tracks 8 1/4 x 20 x 1/2” Phillips pan head screws 16 #12 X 3/4" Wood screws 1 Attach the Gemini Arm Install the Gemini Arm onto both glide tracks with the screws included. Tighten all screws with a Phillips screwdriver. www.workriteergo.com 800.959.
Gemini Arm Slide Kit Installation Instructions 2 Position the Glide Tracks If possible, remove the table surface and place it upside down before mounting the Gemini Slide Kit. A A A Place the Gemini Slide Kit on the tabletop. Position the tracks so that the fronts are aligned with each other and up to 1" are within 1 inch from the table edge. ! 3 IMPORTANT The glide tracks must be parallel for the Slide Kit to function.
