Sierra Modesty Panel Assembly Instructions TM #1500176 - Rev A
SierraTM Modesty Panel - Assembly Instructions List of Parts, grouped by package A Rolled Up Modesty Panel with 2 Aluminum Tubes Qty: 1 B C 1 #8 x .75 Phillips head Screws For Laminate Tops only Qty: 6 D C-Clip Qty: 3 #10-24 x .38 Pan head Type 23 Screws For Silhouette Tops only Qty: 6 Verify that you have all the hardware and tools needed for the assembly Check your packages against the list above to verify that you have all the parts needed.
SierraTM Modesty Panel - Assembly Instructions 2 Unroll the Modesty Panel Remove the Aluminum Tubes from inside the cardboard tube containing the rolled up Modesty Panel, then carefully unroll the panel. DO NOT fold or crease the fabric, this will leave permanent marks. 3 Attach C-Clips to Underside of Worksurface a Determine where you want to position the Modesty Panel under your worksurface. Any location in front of the legs where it will fit is okay.
SierraTM Modesty Panel - Assembly Instructions 4 a b Assemble Panel and Snap Into Place Insert the Aluminum Tubes into the cloth pockets at the top and bottom of the Modesty Panel. Insert top end of Modesty Panel into C-Clips on the underside of the worksurface. a A b 4 Workrite Ergonomics | 800.959.9675 www.workriteergo.
