Assembly Instructions for 3-leg Workcenters Owner's manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3
Sierra Series Workcenters - Assembly Instructions for 2 and 3-leg Tables
1
Verifythatyouhaveallthehardwareandtoolsneededfortheassembly
Checkyourcartonsagainstthelistonpage2toverifythatyouhaveallthepartsneeded.
Youwillalsoneedthefollowingtools:
#2tipPhillipsscrewdriverordrillbit
#3tipPhillipsscrewdriverordrillbit
IfyoudonothaveaWorkritetabletop,youwillalsoneeda:
⅛"pilotdrillbit
2
or
3-LegTablesOnly:AttachCrossbarstoCenterLegBracketusing
¼-20x⅝"ButtonheadMachineScrewsand
5
/
32
" AllenWrench
For 2-Leg table assembly, please
proceed to Step 3.
To avoid stripping the threads,
always insert and make the
rst few turns of the screw BY
HAND with an Allen wrench,
ensuring it is in straight.
D
C
E
E
D
F