Assembly Instructions for 3-leg Workcenters Owner's manual

4 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Sierra Series Workcenters - Assembly Instructions for 2 and 3-leg Tables
4
AttachBasetoTabletop
Be sure that the electric cables
are coming out from the back of
the legs and are not crimped or
pinched between the legs and the
tabletop.
IfyouhaveaWorkritetabletop,aligntopbracketmountingholestopre-drilledholesintabletop
andattachusing#12PhillipsheadScrews.
Otherwise,alignbaseindesiredpositionandmarkplacementofmountingholes,thenusedrillbit
todrillpilotholesatmarkedlocations.Donotdrillallthewaythroughtabletop!Attachtothebase
using#12PhillipsheadScrews.
3
AttachCrossbarstoSideLegsusing¼-20x⅝"ButtonheadMachineScrews
To avoid stripping the threads,
always insert and make the
rst few turns of the screw BY
HAND with an Allen wrench,
ensuring it is in straight.
3-Leg Tables
2-Leg Tables
3-Leg Tables
2-Leg Tables
D
D
D
B
B
B
B
E
E
E
E
J
J
J
J
J
A
A
F
F