Assembly Instructions for 3-leg Workcenters Owner's manual

6 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Sierra Series Workcenters - Assembly Instructions for 2 and 3-leg Tables
7
AttachSwitch
Ifyouhaveanunderworksurfaceswitch,pleaseproceedtoStep9bbelow.
OnWorksurfaceSwitch
Tilttablesothatyoucanaccessbothsidesoftabletop.Attachonworksurfaceswitchbyinserting
theswitchintotherecessedopening.Attachbackplatewithscrewsprovidedwithswitch.Proceed
to Step 10.
a
Top side of table
a
OR
UnderWorksurfaceSwitch
Attachunderworksurfaceswitchtoundersideoftabletopusingscrewsprovidedwithswitch.
Workritetabletopswillhavepilotholesnearfrontedgeoftabletop.
Ifinstallingonnon-Workritetabletop,alignswitchsothatoutermostedgeofswitchisushwith
edgeoftabletop.Pre-drillscrewpilotholeswith
3
/
32
"drillbit.Attachunderworksurfaceswitchto
undersideoftabletopusingscrewsprovidedwithswitch.
b
b
Thread cable
through this
slot.
I
I
I