Assembly Instructions for 3-leg Workcenters Owner's manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 7
Sierra Series Workcenters - Assembly Instructions for 2 and 3-leg Tables
ConnectLegCablestoControlBox
Ifprovided,useextensioncable(s)fortheleg(s)farthestfromthecontrolbox.
Insertthelegcablesintothe6-inchcontrolboxcablesandthenintoterminalslabeledM1,M2and
M3.For2-Legtables,DONOTUSEterminalM3.
InserttheblueswitchcableintotheterminallabeledHS.
M1
M2
M3
a
b
c
a
b
c
3-Leg tables only!
Do NOT use this
terminal (M3) for
2-Leg tables.
Never connect or remove leg
or switch cables to or from
control box when power is
connected! Doing so will
damage control box.
8
ConnectPowertoControlBoxandputWorkcenterupright
Connecttheelectricalcabletothecontrolbox.
Turnthetableoverintoanuprightposition.
Plugtheelectricalcableintothepoweroutlet.
9
a
b
a
b
M
L
G
G
c
c
O