Sonoma Series™ — Electric Height Adjustable Workcenters Sonoma Series SELECT ™ Assembly Instructions 1450 Technology Lane • Petaluma, CA 94954 • 800-959-9675 • www.wrea.
Sonoma Series™ SELECT Workcenters PARTS LISTING Top (size and shape differ for each model) If WorkRite is not supplying the top, it is installer’s responsibility to position the base under the worksurface to provide maximum stability.
Sonoma Series™ SELECT Workcenters ASSEMBLY INSTRUCTIONS OPEN ALL PACKAGES AND VERIFY THAT YOU HAVE ALL THE HARDWARE AS INDICATED IN THE PARTS LISTING. To assemble you will need a #2 and #3 tip Philips screwdriver. STEP 1 STEP 2 Place Column Assembly on floor with the black top bracket facing down. STEP 3 Slide Support Frame onto column as shown. STEP 4 Attach one half of Die Cast Base to bottom plate with 3/8” button head machine screws, do not fully tighten screws.
Sonoma Series™ SELECT Workcenters ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Attach feet to die cast base with 3/4” machine screws. Note: the long end of the foot extends to the front of the base. This is the side that faces the user. The rear of the base is the side with the control pad connector. long side Attach the entire column assembly to the worksurface with the #12 x 3/4” wood screws provided. Use the locating holes provided.
