Use and Care Manual

FEATURES AND BENEFITS
Dry Coat™ Rust Preventative is a water-based liquid RP for
ferrous metals and represents a significant advancement in
corrosion prevention technology. It can be applied by dip,
spray, or flowcoating.
Dry Coat™ uses ARMOR VCI Nanotechnology creating a
user-friendly replacement for solvent and oil-based corrosion
inhibitors. At ambient conditions this clear protective coating
will dry-to-touch within 30 minutes.
Unlike sticky or tacky products, Dry Coat™ does not
attract dirt or dust on metal parts. It is safe to use on ferrous
metals and stainless steel and will not harm most elastomers
or plastics.
Its safety features extend to people too! Dry
Coat™ is non-hazardous and easily washes
off using mild detergents or solvent-based
cleaners.
APPLICATIONS
Dry Coat™ is ideal for small parts in large
quantities (nuts and bolts, fasteners,
hardware) or odd-shaped parts that cannot
be placed into ARMOR bags or wrap.
It also works well for export equipment
or machinery, gears, pipes, flanges,
cast iron,and ferrous metals, and saves
time and money compared to other
wrapping methods.
Dry Coat™ Rust Preventative provides indoor protection
up to one year and is not recommended for outdoor use
unless used in combination with other ARMOR VCI
products that contain VCI and UV inhibitors.
Workshop Hero is a division of Armor
Protective Packaging
®
. ARMOR
provides the industry’s cleanest,
easiest, safest and most effective
corrosion management systems for
metal products to a global customer
base. ARMOR’s full line of vapor
corrosion inhibitor (VCI) packaging
products, desiccants and our rust
removal and prevention liquids are
designed to protect metals before,
during and after transport or storage.
ARMOR’s industry reputation as a
trusted business partner has been
built by serving our customers and
preserving their investments for over
40 years.