User Manual

Worksman Trading Corporation – 94-15 100
th
Street – Ozone Park, NY 11416 – [phone]
www.worksmancycles.com Parts list ADPT09
Rear Axle and Related Parts
Part # Description Part # Description
101 Hub for Free Wheel w/ Cups 102 Key Lock Washer
103 Cups for 101 Hub 105 Adjusting Cone (threaded)
106 Stationary Cone (presses onto axle) 109 Dust Washer
113 Locknut - Left Hand Thread - Free Wheel Side 146 Wheel Bearings (pair)
130 Axle Parts Set (102,105,109,113,146,59A,93D) 58A Rear Axle (31 ½”)
3980 Drive Wheel Hub 58 Rear Axle (34” – Pre 1965)
59A Locknut - Drive Side 69 Fixed Drive Sprocket
4129 Freewheel Sprocket (22 tooth) 63A Bushing for 4129 (freewheel models)
63B Set screw for 69 and 4129 63C Keyway for Rear Sprocket
91 Pillow Block Bearings (each) 91A Bolt, Nut, Washer for 91 Bearing
93 Spacer Washer for Left Side Wheel 93D Washer – Drive Side Spacer
301 1 Speed Coaster Brake Hub 404N 3 Speed Coaster Brake Hub
302 Coaster Brake Conversion Kit (for freewheel) SS13N-1 3 Speed Cable and Trigger for 404N
405 3 Speed Conversion Kit (for freewheel) SS721 Coaster Brake Internal Kit (for 301)
Crank Parts (Pedal Section) and Chains
Part # Description Part # Description
1265 Crank Parts (1266,1268,1269,1271,1272,1273,1274) 1265BMXS Deluxe Sealed Crank Set (Upgrade)
1266 Crank Bearings (pair) 1267D Complete Crank Set (36T,1265,1275,1380D)
1267F Complete Crank Set w/ 32T Sprocket 1267H Complete Crank Set w/ 28T Sprocket
1268 Cups for Crank Housing (pair) 1269 Stationary Washer (inside)
1271 Key Washer (outside) 1271 Key Washer (outside)
1272 Adjusting Cone (threaded, outside) 1273 Stationary Cone (inside)
1274 Crank Locknut 1275 Crank (one piece, forged - 6.5”)
1380D Sprocket 36 Tooth (3/16”) 1380F Sprocket 32 Tooth (3/16”)
1380H Sprocket 28 Tooth (3/16”) 7217 Pedal Set (pair)
4910 Chainguard 4914A Chain Connecting Link (1/2”x3/16”)
4914B Chain (freewheel models) 4914C Chain (long for 32T and coaster brake)
4914EE Chain (short for coaster brake) 4914F Chain (long for 36T and coaster brake)
4915 Chain Adjusters (for coaster brake)
Note - The Adaptable comes standard with a 36 tooth front sprocket and 1265 crank part set. Smaller sprockets in the front will reduce
the gear ratio, making it easier to start pedaling. The 1265BMXS is a sealed, heavier duty upgrade for crank parts.
Seats, Seatpost, Baskets, Cabinets, and Fenders
Part # Description Part # Description
6910V Saddle (wide w/o springs - standard) 6911V Saddle (wide w/ springs)
4908C Seatpost (12” x 7/8”) 7913A-V Seatpost Clamp (seatpost to seat)
4909 Bolt, Nut, Washer for 4911C 4911C Seatpost Clamp (seatpost to frame)
3927 Rear Cabinet (22”x15”x16”) 5927 Rear Wire Basket (21”x15”x9”)
7227 Rear Flat Steel Basket (24”x17”x12”) 133WH Removable Front Basket (14.5”x9.5”x9”)
7228 Front Wire Basket (21”x15”x9”) 139 Front Wire Basket (18”x13”x6”)
82 Front Fender 83A Front Fender U-Brace
82K Front Fender Hardware Kit (95, 4907, 4907A) 95 Front “L” Bracket (fender to fork)
4907 Bolts, Nut, Washer (U-brace to fender) 4907A Bolt, Nut, Washer (“L” bracket to fork)
4902 Rear Fender (24” or 26” rear wheels) 84 Rear Fender Brace Set (26”, one side)
84A Rear Fender Brace Set (24”, one side) 92 Rear Fender Brace Bracket (on frame)
4902K Rear Fender Hardware Kit (6-4905, 6-4906) 4905 Bolt, Nut, Washer (rear fender to brace)
4906 Bolt, Nut, Washer (rear fender brace to 92) AD24* Complete Rear Fender Kit (24”)
AD26* Complete Rear Fender Kit (26”)
* AD24 and AD26 include two rear fenders, braces, and all mounting hardware. (2-4902, 2-84A, 1-4902K)