Height Adjustable Gaming Desk INSTRUCTION MANUAL The Maximum Weight this product can hold - up to 50 kgs AFTER SALES SUPPORT NZ 0800 222 246
Important Safety Instructions Do not place TVs or other heavy objects on top of this product. Never allow children to climb or hang from the top.
Tips before you start 1. Please check that all parts are present before you start the assembly of your furniture. 2. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step. 3. For larger items, please ensure that you have sufficient space and people (as indicated on page 1) to assemble your product safely. 4.
Part Name 4 12 3 6 8 5 11 14 1 7 2 9 10 3 13 1 x2 PCS 2 x1 PC 3 x1 PC 4 x1 PC 5 x1 PC 6 x2 PCS AFTER SALES SUPPORT NZ 0800 222 246
Part Name x1 PC 8 x2 PCS 9 x1 PC 10 x4 PCS 11 x1 PC 12 x1 PC 13 x1 PC 14 x1 PC 7 A x 12 pcs M6 E x 4 pcs M4 4 B x 4 pcs C x 1 pc M8 F x 15 pcs ST4.2 D x 1 pc 4x4 5x5 2.5x2.
Assembly C A 1 3 2 Assemble (1)&(2)(3) together, use the 5x5 allen key (C) to tighten the screws(A).
Assembly Install Supporting beam(4) 1 Loose C 4 Stretch Unscrew the screws on supporting beam(4) with the 4x4 allen key (C), then stretch it (4). C B 2 4 2 3 Install supporting beam(4) on the columns(2)(3), tighten the screw (B) with the 5x5 allen key (C).
Assembly 5 3 2 Connect transmission rod (5) with columns (2)(3), and use the 2.5x2.5 allen key(D) to tighten it. 1 2 D Do not rotate the angle exceed one third of the circle. D 2.5x2.
Assembly 6 3 A C 2 Connect supporting plate(6) with columns(2)(3). use the 5x5 allen key(C) to tighten the screws(A).
Assembly Install the power adaptor 11 4 Install the adaptor holder (11) to the supporting beam(4) Install the tabletop, control box and handset. Connect the tabletop, control box(14) and the handset(12) with the screws (F), then tighten it with pistol electric drill. F The distance between the two sides shall not be longer than 200 mm. 12 The handset should be installed on the side of the lifting column with motor.
Assembly Tighten the supporting beam and the transmission rod screw 5 C G 4 Use the 4x4 allen key (C) to tighten the 4 screws on the supporting beam (4), and then tighten the nut on the transmission rod (5) with the wrench (G).
Assembly Install baffle and power adaptor Install the baffle (8) to the supporting beam (4) using screws (E), and then tighten it with the 2.5*2.5 allen key (D). E 8 D 4 11 7 Insert D E 4 PCS 11 2.5x2.
Assembly Connect all cables to the adaptor (7) 9 11 2 7 1 13 14 12 1 2 Tear off 10 Manage cables 10 Fix them 10 Switch Handset Cord Port Wire Port 10 You can use the cable tie (10) to sort out the cables on the table to keep the cables tidy.
Assembly Item No.: HS29A-1 Operation Instruction 1. Product Outline 2. Product Specification 1.Botton introduction: There are two buttons that "▲" , "▼". (1) "▲" Adjust : the desk upwards; (2) "▼" Adjust : the desk downwards; 3. Operating Instructions ● Reset a. When the desk is at the lowest position, long press the "▼“ button for 5 seconds to enter the reset mode, the reset will be completed until the lifting system reached bottoms then rebounds to stop. b.
Assembly ● Lifting Press "▲”or “▼”button to adjust the height of the desk. ● Troubleshooting If there is no response after pressing the "▲”or “▼” button after working for a period of time, please rest for more than 18 minutes before using it again. Issues and Tips. The following tips will help you detect and eliminate a common fault and error. If a fault identified is not listed below, please contact customer services.
Assembly 15 AFTER SALES SUPPORT NZ 0800 222 246
STOP i BEFORE RETURNING TO STORE Read the manual. It will help you get the best out of your product. Still have questions? Call After Sales Support 0800 222 246 Warranty We pride ourselves on producing a range of quality home appliances that are both packed with features and completely reliable. We are so confident in our products, we back them up with a 2 -year warranty. Now you too can relax knowing that you are covered.
