Height Adjustable Home Office Desk INSTRUCTION MANUAL The Maximum Weight this product can hold - up to 50 kgs AFTER SALES SUPPORT NZ 0800 222 246
Important Safety Instructions Do not place TVs or other heavy objects on top of this product. Never allow children to climb or hang from the top.
Tips before you start 1. Please check that all parts are present before you start the assembly of your furniture. 2. For ease and speed of assembly, we recommend that before you commence each step of the assembly, that you identify all the parts required for that step. 3. For larger items, please ensure that you have sufficient space and people (as indicated on page 1) to assemble your product safely. 4.
Part Name 3 1 4 2 A x 8 pcs M6 3 B x 8 pcs M8 C x 1 pc 5x5 D x 2 pcs Cable clamp AFTER SALES SUPPORT NZ 0800 222 246
Assembly Install the tabletop and the lifting columns 2 1 C B Use a hexagon allen key(C) and M8 screws to assemble the tabletop(1) and lifting columns(2). Note: Do not touch the glass surface directly to the ground during installation to avoid scratching the tabletop by sharp objects. Please be careful when installing the columns to avoid damaging the glass.
Assembly Install the feet C A 3 Use a hexagon allen key(C) and M6 screws(Ax8) to install the feet to the lifting columns. Note: Please be careful during installation to avoid falling and damaging the glass; pay attention to the orientation.
Assembly Install the motor and power lines Connect the motor plug to the control box, then connect one side of the adapter plug to the adapter, another side to the power line. Caution: the motor and power lines can be fixed by cable clamp according to actual use.
Assembly Key button LED Screen 1. Long press the up/down buttons to adjust the height of the desk; The screen will show “bot” when the desktop runs to its lowest point; and it will show “top” when the desktop runs to its highest point. 2. key button: 1,2,3,4 are the four height memory buttons, long press the button about 3s can record the current height; 3. Press the 3 and 4 buttons at the same time, long press 5 seconds, the RST reset indication will appear.
Assembly Common fault treatment The following tips will help you detected and eliminate the common fault and error. If the fault you met is not listed below, please contact with your supplier. Only the manufacturer and professionals are capable for investigating and correcting those fault and error. Fault phenomenon No response while long pressing down arrow after connected with a power supply 1.
Assembly 9 AFTER SALES SUPPORT NZ 0800 222 246
STOP i BEFORE RETURNING TO STORE Read the manual. It will help you get the best out of your product. Still have questions? Call After Sales Support 0800 222 246 Warranty We pride ourselves on producing a range of quality home appliances that are both packed with features and completely reliable. We are so confident in our products, we back them up with a 2 -year warranty. Now you too can relax knowing that you are covered.
