Multi Sensor UK WORKZONE E46106.book Seite 1 Montag, 22. April 2013 1:20 13 Multi-Sensor / Stud Detector User-Guide CUSTOMER SERVICE UK: 0800 / 328 6020 Ireland: 00800 / 4467 5888 Info@globaltronicssupport.
Multi Sensor UK WORKZONE E46106.book Seite 2 Montag, 22. April 2013 1:20 13 Table of Contents 2 2 3 5 5 5 6 9 9 9 10 10 11 Technical data Scope of delivery Safety Description of parts Insert battery Use Detecting hidden objects Cleaning Storage Conformity declaration Recycling Warranty Warranty card If the device is not used in accordance with these operating instructions, the envisaged protection can be impaired. Please keep these instructions and pass them on to other users.
Multi Sensor UK WORKZONE E46106.book Seite 3 Montag, 22. April 2013 1:20 13 Safety Please read carefully through the following information and keep these instructions, in case you need to refer to them later. If you pass the product on to someone else, please also include these instructions. WARNING! When using battery-operated devices, basic safety measures must be observed to protect from fire hazards and personal injury and damage to property, including the following guidelines.
Multi Sensor UK WORKZONE E46106.book Seite 4 Montag, 22. April 2013 1:20 13 Battery instructions Batteries must not be disposed of with household waste. Every consumer is legally obligated to dispose of batteries properly at the designated collection centres. Never recharge non-rechargeable batteries! Explosion hazard! Keep batteries away from children, do not throw into fire, short circuit or dismantle.
Multi Sensor UK WORKZONE E46106.book Seite 5 Montag, 22. April 2013 1:20 13 Description of parts Display Calibration button MODE Button ON/OFF Button Integrated marker Insert battery 1. 2. You need a 9-volt block battery size 6 F 22 (included in the scope of delivery). Insert battery: Open the battery compartment on the bottom of the device, pull out the connector slightly and push the battery onto the connector with the correct polarity.
Multi Sensor UK WORKZONE E46106.book Seite 6 Montag, 22. April 2013 1:20 13 Detecting hidden objects CAUTION In order to avoid personal injury or property damage, please note the following: – Beams/girders are built into brickwork at regular distances. Determine the distance of the beams/girders prior to working on brickwork. – Irregularities in the distances indicate e.g. electric cables or water lines. – Measurement errors can occur based on the surface condition.
Multi Sensor UK WORKZONE E46106.book Seite 7 Montag, 22. April 2013 1:20 13 Calibration is required again after 60 seconds, in order to reduce the occurrence of measurement errors. 1. 2. 3. Hold device against the surface (selection location whether the object searched for is very unlikely to be). Keep calibration press down and do not move the device, 3 short beeping tones confirm successful calibration. Continue to keep key pressed and start search.
Multi Sensor UK WORKZONE E46106.book Seite 8 Montag, 22. April 2013 1:20 13 a) Display shows only the mode or max. 1 bar = no object nearby. When you are approaching the sought object, at least 2 bars of the LC display are filled. With a full bar diagram, please make at mark at the point (see illustration).
Multi Sensor UK WORKZONE E46106.book Seite 9 Montag, 22. April 2013 1:20 13 The permanent display of only 1 bar does not mean that an object has been detected. You can only be certain of having detected an object if the device is full of bars and a permanent beeping tone sounds. If a lightning symbol is displayed in addition to the AC mode and the bar diagram, the found object is a LIVE CONDUCTIVE ELECTRIC CABLE.
Multi Sensor UK WORKZONE E46106.book Seite 10 Montag, 22. April 2013 1:20 13 Recycling Dispose of the packaging by separating the different materials. Check with your local waste elimination company with regard to the required measures for scrapping if the appliance is no longer required. The device may not be disposed of through the household refuse. Batteries and rechargeable batteries are not permitted to be disposed of with household waste.
Multi Sensor UK WORKZONE E46106.book Seite 11 Montag, 22. April 2013 1:20 13 Multi-Sensor Your details: Name Address E-Mail Date of purchase* *We recommend you keep the receipt with this warranty card Location of purchase Description of malfunction: CUSTOMER SERVICE Please send your completed Warranty Card to: UK: 0800 / 328 6020 Ireland: 00800 / 4467 5888 info@globaltronicssupport.
Multi Sensor UK WORKZONE E46106.book Seite 12 Montag, 22.
