Instruction Manual

Set the Auto stop switch to ON if you are playing a 33
RPM record and you want the turntable to
stop turning when the record is finished. If
the switch is set to OFF, the turntable will continue turning.
• Remove the stylus guard and unlock the
Tone Arm lock.
• Push the Lift Lever up to raise the Tone
Arm and then gently move the Tone Arm
to the desired position over the record.
The platter will begin to spin when the
Tone Arm is moved toward the record.
Push the Lift Lever forward to lower the Tone Arm slowly onto the desired position on the
record. The record will begin.
Playing a Record
• If the auto switch is turned to ON, the record will stop playing automatically. If it is set to
OFF, the record will not stop automatically.
• When the record is finished, push the Lift Lever backwards to raise the Tone Arm and
gently move it back to its rest position.
• When you have finished playing records, engage the Tone Arm lock to protect it from
accidental movement. Turn the Power knob to switch the unit OFF. Unplug it from the
power
supply if it is not going to be used for a while.
NOTE: Should your record stop before the last track finishes, set the Auto Stop switch to OFF.
Your record will now play to the end, but you will have to stop the turntable rotation
manually.
Playing a Cassette
• Turn ON the unit and adjust the volume to an appropriate level.
• Turn the Function knob to AUX/TAPE and the display will show “tP”
• Insert a pre-recorded tape into the cassette slot with the
tape side to the right.
By pushing slightly, the tape will slide into place
and begin playing automatically.
NOTE: One end of the tape will remain visible.
• To fast forward the cassette tape, press the
Tape Operations button halfway down while
the cassette is playing.
• To resume normal playback, release the Tape
Operations button.
• To stop playback, press the Tape Operations
button completely. Playback will be stopped