Specification Sheet

SLIMdri
™
Surface-Mounted ADA Compliant Hand Dryers
Electrical specications:
Cover options:
Cast Aluminum - with epoxy paint or chrome plating.
Stainless Steel - with polished or brushed nish
110-120 V 208 V 220-240 V
Amps 8.3 3.7 4.1
Watts 950 775 950
Hz 60 Hz 60 Hz 60 Hz
SLIMdri
™
is an energy efcient, surface-mounted and ADA compliant hand dryer.
The SLIMdri hand dryer is perfect for all commercial washrooms. The On/Off
heating control, stylish low-prole design with exible cover options and universal
voltage features ts any décor or washroom environment.
Product Benets
• Surface-mounted ADA compliant
• Simplies installation and reduces installation costs
• Up to 40% faster dry time than leading competitive surface-mounted
ADA dryers
• Up to 70% less energy than competitive dryers
• Universal voltage – accepts 110-120 / 208 / 220-240 VAC input
• ON/OFF heat control to customize comfort and energy savings
• Incorporates SteriTouch
®
antimicrobial technology inhibiting the growth of
bacteria, mold and fungus extending the dryer’s service life
• Automatic activation
• IP23 rating - protection against harmful water ingress
• Ultra compact and contemporary stylish design
• Durable and vandal resistant
Cover Material Cover Finish / Kit
110-120 / 208 /
220-240 V
Unit Weight Shipping Weight Unit Size (HxWxD) inch/mm Shipping Size (HxWxD) inch/mm
Aluminum White # L-974 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175
Aluminum Polished Chrome # L-970 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175
Aluminum Brushed Chrome # L-971 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175
Aluminum Black # L-162 9.0 lbs / 4.1 kgs 10.6 lbs / 4.8 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175
Stainless Steel
Polished # L-972 10.7 lbs / 4.8 kgs 12.3 lbs / 5.5 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175
Stainless Steel
Brushed # L-973 10.7 lbs / 4.8 kgs 12.3 lbs / 5.5 kgs 10.7” x11.43” x 3.9” 271 x 290 x 100 13.8” x 13” x 6.9” 350 x 330 x 175
SLIMdri™ hand dryer shall be manufactured by World Dryer Corporation
to include a cover constructed of either die-cast aluminum nished with
epoxy paint or chrome plating; or stainless steel. The wall mounting
plate shall be constructed of die-cast aluminum and the nozzle shall be
constructed of die-cast aluminum nished with epoxy paint nish. Epoxy
painted covers shall incorporate SteriTouch
®
antimicrobial technology.
The cover shall be attached to the wall mounting plate with tamper-proof
screws. Motor shall be a thermally-protected universal brush type motor
operating at 13,000 RPM and delivering 70 CFM air ow at a velocity
of 140 MPH (12,320 LFM). Dryer shall incorporate universal controls
accepting 115 / 208 / 230VAC input. Dryer will incorporate a chrome
wire heating element protected by an automatic resetting thermal
cutoff. Dryer shall be activated by an automatic infrared sensor with a 3
second run-on time and 60 second vandal shut-off. Control board shall
contain a heater control switch which can be controlled in either ON or
OFF position. Dryer shall provide a 48°F temperature rise. Dryer shall
have an ingress protection rating of IP23. Hand dryers shall be certied
to Underwriters Laboratories, Inc. standards for safety.
Architecture & Engineering Specications
Aluminum
Stainless steel