User manual

SmartDrive SD1000 GPS Navigator User’s Guide
40
World Express Mapping Sdn. Bhd.
GPS Status Screen
Select GPS on from the middle left at the Main Navigation
Menu, then the GPS screen will show.
The GPS screen illustrates the information of the satellite signals
that received by your GPS receivers. This is only need to be
checked while you are having problem getting a signal lock.
Please make sure your GPS is free of obstructions. An open view
of sky and immobility is preferable for first fix.
In the GPS Screen, blue and red points represent GPS signal. Blue
points illustrate strong GPS signals, the GPS receiver has locked
onto; however, red points illustrate weak signals. The bar charts
below each signals shows the signal strength of each satellite
signals. When device is positioning your location, most signals
will be shown in red. Please be patient for fixing location.
Altitude : Your current altitude, this will be showed only
when 3D positioning fixed.
Velocity : Speed of vehicle by reading GPS.
Heading : Estimate direction heading from last position.
Status : Successful positioning GPS warming up
GPS not available
Date/Time : The clock is accurate only until positioning succeeds.
GPS position : Your current latitude and longitude.
GPS status : 2D/3D positioning. 2D positioning needs minimum
3 satellites and 3D positioning needs minimum 4 satellites.