HOMEOWNER’S INSTALLATION AND OPERATING INSTRUCTIONS ELECTRIC FIREPLACE INSERT MODEL #25-900-001 Français p. 19 Español p. 39 For installation with Comfort Glow Fireplace Mantel IMPORTANT INSTRUCTIONS PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE WARNING! C US IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. INSTALLER: Leave this manual with the appliance.
TABLE OF CONTENTS Safety Information..........................................................................................................................3-5 Installation Instructions...................................................................................................................6-9 Operation Instructions................................................................................................................10-12 Care and Maintenance..............................................
SAFETY INFORMATION SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST. – Friday. 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance.
SAFETY INFORMATION DANGER Electrical Connection A 15-Amp, 120-Volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 6 ft. (1.8 m) long three wire cord, exiting the right side of the fireplace. Plan the installation to avoid the use of an extension cord.
SAFETY INFORMATION Remote Control This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
INSTALLATION INSTRUCTIONS Fireplace Dimensions Specifications Voltage Frequency Heater Rating Max. Amps Width Depth Height 120 V AC 60Hz 1350W 12A 24-1/4 in. (616 mm) 9-13/32 in. (239 mm) 20-1/4 in.
INSTALLATION INSTRUCTIONS Package Contents C A B JY-3B PART DESCRIPTION QUANTITY A Mounting Bracket Kit 2 B Screw (ST4) 4 C Infrared Remote Control 1 7
INSTALLATION INSTRUCTIONS The Fireplace should be located in an area: • Out of direct sunlight • Not susceptible to moisture • Away from uninsulated outside wall • At least 3 ft. (.9 m) from drapery, furniture and other combustibles Clearance to Combustibles Sides 2-27/64 in. (61.5 mm) Floor 0 in. (0 mm) Top 2 in. (51 mm) Front 36 in. (914 mm) Rear 25/32 in. (20 mm) Wooden Facing [up to 5/8 in. (16 mm) thick] 5/16 in.
INSTALLATION INSTRUCTIONS 1. Place the assembled mantel near a 15-amp, 120-volt grounded electric outlet. Read all instructions before using this appliance. 2. Place the insert directly in front of the mantel opening. 3. Carefully lift the insert through the center opening in the front of the fireplace. The bottom of the insert has two foam rubber strips to prevent scratching of the hearth base. Slide the insert back through the opening until the metal trim makes contact with the front of the mantel. 4.
OPERATING INSTRUCTION The fireplace control functions can be accessed in two (2) ways: • Using the touchpad control panel, located in the upper right-hand corner of the fireplace behind the sliding control panel cover. • Using the multifunction remote control unit. The fireplace features conveniently separate controls for flame effect and for heater control. This allows you to operate the unit in two (2) different modes: • As a full-featured fireplace - both flame effect and heater are on.
OPERATING INSTRUCTION 5 Fahrenheit/Celsius Display: This button displays F (Fahrenheit) or C (Celsius) depending on how the temperature mode is set. When the fireplace is first turned on, the Fahrenheit (F) temperature will be displayed. To switch from Fahrenheit to Celsius, or vise-versa, when HEATER is ON, hold HEATER CONTROL button for 10 seconds.
OPERATING INSTRUCTION IMPORTANT: Under normal operation, when power is interrupted from either an outage or from unplugging unit from wall while still in operation, error code “EC” may appear on the LCD control panel and the unit will cease operation. In order to reset, unplug the unit for 10 minutes, then plug back in for normal operation in accordance with the Use and Care Guide. 1 2 Main Power Button: This button supplies power to all the functions of the fireplace.
CARE AND MAINTENANCE Before attempting ANY maintenance: 1. Turn off power to the unit. 2. Unplug the power cord from outlet. 3. Let fireplace cool if it has been operating. Glass Information: 1. Under no circumstances should this product be operated with broken glass. 2. Do not strike or slam the glass. 3. Do not use abrasive cleaners to clean the glass. 4. This product uses tempered glass. Replacement of the glass supplied by the manufacturer should be done by a qualified service person.
ELECTRIC WIRING DIAGRAM Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes. CIRCUIT DIAGRAM WARNING: Disconnect power before servicing. DANGER Disconnect power before servicing. Any electrical re-wiring of this appliance must be done by a qualified electrician. This wiring must be done in accordance with local codes and/or in Canada with the current CSA C22.
TROUBLESHOOTING If you have any questions regarding the product, please call customer service at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST, Monday – Friday. Problem Possible Cause Corrective Action Fireplace does not operate; the ON/OFF power light on the control panel is not lit. 1. The fireplace is not plugged in. 1. Make sure the fireplace is plugged in to a standard 120V outlet. 2. A circuit breaker is tripped or a fuse blown. 2.
WARRANTY The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. This electric fireplace must be installed and operated at all times in accordance with the instructions furnished with the product. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
REPLACEMENT PARTS LIST For replacement parts, please call customer service at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST, Monday – Friday. Ref.
Printed in China 18
SARDONIA COMPACT FIREPLACE MODEL #EF5538 Español p. 12 Francais p. 23 IMPORTANT INSTRUCTIONS PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE WARNING! C US IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference.
TABLE OF CONTENTS Safety Information..........................................................................................................................3-4 Package Contents..........................................................................................................................5-6 Operating Instructions....................................................................................................................... 7 Care and Maintenance............................................
SAFETY INFORMATION SAVE THESE INSTRUCTIONS Please read and understand this entire manual before attempting to assemble, operate or install the product. 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 ft.
SAFETY INFORMATION DANGER Electrical Connection A 15 Amp, 120 Volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard with a 6 ft. (1.8 m) long, three-wire cord, exiting the right side of the fireplace. Plan the installation to avoid the use of an extension cord.
PACKAGE CONTENTS A PART DESCRIPTION QUANTITY A Electric Heater/Wood Mantel 1 5
PACKAGE CONTENTS Fireplace Dimensions A B C Ref. EF5538 A 10.88 in. (276.4 mm) B 38 in. (965.2 mm) C 33 in. (838.2 mm) Clearance to Combustibles TECHNICAL SPECIFICATIONS VOLTAGE 120V AC FREQUENCY 60HZ AMPS 12A 1350W HEATER RATING 6 Sides 2-27/64 in. (61.5 mm) Floor 0 in. (0 mm) Top 2 in. (51 mm) Front 36 in. (914 mm) Rear 0 in.
OPERATING INSTRUCTIONS Read All Instructions Before Use Check that the heater outlet grill is not covered or obstructed in anyway, and make sure the power to the unit is switched on. NOTE: When the heat function is used for the first time, a slight odor may be present. This is normal and should not occur again unless the heater is not used for an extended period of time. Control Panel The control panel is located inside the lower right door on the front panel.
CARE AND MAINTENANCE Cleaning Always turn the heater OFF and unplug the power cord from the outlet before cleaning. Use a vacuum or duster to remove dust and dirt from the heater and vent areas. To maintain the finish, clean with a soft, slightly damp cloth and buff with a dry cloth. Never use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface. Wood furniture should never be dragged across a floor.
ELECTRIC WIRING DIAGRAM Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes. CIRCUIT DIAGRAM DANGER Disconnect power before servicing. Any electrical re-wiring of this appliance must be done by a qualified electrician. This wiring must be done in accordance with local codes and/or in Canada with the current CSA C22.1 Canadian Electrical Code, and for US installations, the National Electrical Code ANSI/NFPA NO 70.
TROUBLESHOOTING If you have any questions regarding the product, please call customer service at 1-800-776-9425, 8:30 a.m. –5:00 p.m. EST, Monday – Friday. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Fireplace does not operate. 1. The fireplace is not plugged in. 1. Make sure the fireplace is plugged in to a standard 120V outlet. 2. A circuit breaker is tripped or a fuse blown. 2. Check additional appliances on the circuit; ideally the fireplace should be on a dedicated 15 Amp circuit. 3.
WARRANTY The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. Variations in actual wood color and finishes which may result from natural characteristics of the wood, such as grain patterns, mineral streaks and the like, are not considered defects.