Owner Manual

~ 6 ~
REMOTE CONTROL
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate
heater in upright position with caster wheels attached. Insert 2 1.5 V7# batteries into the remote control before
using.
1. Power On/Off
Turn the main power on/off switch “O/I” on the rear panel of the heater. The red power indicator on
front panel will light.
Turn on or off the heater by pressing the ON/OFF button on the control panel or by pressing the
Power button on the supplied remote control.
Once power is off, heating elements will stop working first. Fan will continue working for up to 3
minutes to dispense residual heat inside the heater. This is a normal function.
2. Select Working Mode
1. On/Off: To power unit on/off
2. Temp Up: To turn temperature up
3. Temp Down: To turn temperature down
4. Mode: To select heat mode
5. Timer: To set timer function
6. °C/°F: To alternate between Fahrenheit and Celsius display
Select a heat setting.
Press the MODE button to toggle between the three heat settings.
Power for High mode is 1500W; and Low is 1000W. ECO mode is an Economic Energy Saving
Function. When ECO mode is chosen the heater will set a target temperature of 68° and will
cycle on/off to maintain that setting. This target temperature is not user adjustable.