Owner Manual

~ 7 ~
3. Locking Control Panel
4. Setting Room Temperature and °C/°F
5. Setting Timer/Power Off
6. Setting Timer/Power On
For safety, users can lock the control panel so children can’t operate the heater. Locking can be
set in both power-on and power-off modes.
To Lock: Press Temp Up and Temp Down buttons together for 3 seconds. Locking is confirmed
when a buzzer rings. When locked, control panel and remote control will not function.
To Unlock: Press Temp Up and Temp Down buttons together for 3 seconds. Unlocking is
confirmed when a buzzer rings. Lock indication disappears. Control panel and remote control
return to normal function.
Adjust the thermostat by pressing the arrows on the control panel or remote control.
Set temperature indication varies from 59°F to 86°F or from 15°C to 30°C. Once you have
chosen the desired temperature, the heater will remain on until the room temperature
increases to the temperature on the digital display. The heater will cycle on and off to maintain
the desired room temperature.
Press °C/°F button to change the digital display indicator to Fahrenheit value or Celsius value.
When Fahrenheit indicating light is on, digital display indicates Fahrenheit value, when Celsius
indicating light is on, digital display indicates Celsius value.
Note: timer-power-off function can only be set while heater is in power-on mode.
When starting the unit, press the timer button on the control panel or remote control.
Digital display turns set temperature readout to time value for the timer. Press the timer
button repeatedly; the value will vary from 0 hour to 12 hour duration (in1 hour intervals).
The light is on when timer –power-off is set.
Note: timer-power-on function can only be set while heater is in power-off mode.
Under power-off, press the timer button on the control panel.
Digital will indicate time value for the timer. Press the timer button repeatedly; the value will
vary from 0 hour to 12 hour duration (in 1 hour intervals).
The light is on when timer –power-on is set.