Installation & Assembly

A x 4
D x 2
Hardware & Tool required
STEP 1 :
Place SIDE RAILS (3) and FOOTBOARD (2) on a carpeted or padded area as shown. Attach FOOTBOARD (2) with SIDE RAILS
(3) together by inserting JCBB BOLT M8 x 16MM (A).Tighten up the bolts with M5 Allen Key (B). Place SPRING WASHER
1
4
" (D)
and FLAT WASHER
1
4
" (E) into JCBC BOLT M6 x 50mm (C). After that, inserting JCBC BOLT M6 x 50mm (C) at bottom side of
SIDERAILS (3) and FOOTBOARD (2). Tighten up the bolts with M4 Allen Key (BALL SHAPE) LONG (G).
STEP 2 :
Hardware & Tool required
Page 2/4
4x
2x
E x 2 B x 1
G x 1
C x 2
4x
A
B
D
C
E
G
Attach HEADBOARD (1) with SIDE RAILS (3) together by inserting JCBB BOLT M8 x 16MM (A).Tighten up the bolts with M5 Allen
Key (B).
A x 4
B x 1
A
B
1
2
3