User's Manual

User Manual

18. Settings

Your service provider may default some device settings, so you may not be able to change these settings.

 SIM management 

1) Touch it to choose or to disable the SIM card, the card is grey when disabled, the flight mode displays on status

bar.

2) The default SIM card, you can choose Voice call, Video call, Messaging, Data connection.

 Wireless and internet 

1) Flight mode Touch to open or close.

2) Wi-Fi and Wi-Fi settings Touch Wi-Fi to open . Open Wi-Fi, it can search for

available networks automatically，networks without password can be used directly, others need to enter the

password first.

Notice：Open Wi-Fi then the flight mode，Wi-Fi will close automatically；Open flight mode then connect Wi-Fi， it

can be used normally.

 Bluetooth

Bluetooth switch and setting up the touch bluetooth open, will automatically be search nearby bluetooth open

the equipment.

 Data usage

1. Data usage set up mobile data traffic limit, flow more than limit will be close mobile data services.

2. More

Wireless & networks

a. Airplane mode

b. VPN

c. Tethering& portable hotspot

d. Mobile networks

e. GPRS transfer prefer mode

 Audion profiles 

This option gives the phone tones’ settings under the status of receiving calls or notification. Including：Vibration, volume,

ring tones, ring tones notification and feedback（Button operation tone, select Sound, screen lock tone, touch）.To adapt

every environment.

1) Select “Standard / Mute / Conference / Outdoor，Touch the spot on the right, when turns green ,it opens.

2)Volume：Including the ring volume and alarm clock settings, you can manually slide to select.

 Displays

a. Brightness Adjust the brightness b. Auto rotating screen rotate phone to change direction

c. Animation Choose to display animations d. Screen Timeout Adjust the delay before the screen automatically

locks

 Storage 



a. Can view the SD card and cell phone memory usage.

b. Can Unmount SD card or Erase SD card.

c. Can choose the default memory.

 Battery 

Boot time that use and each module to use power in general