User's Manual
Table Of Contents
- FCC Conformity
- Declaration of Conformity
- Introduction
- The C-ZAM/SMASH Portable terminal
- Installing the C-ZAM/SMASH Portable
- Selecting a location
- Unpacking
- Getting started with the C-ZAM/SMASH Portable
- _
- Step 1 - Installation of the SAM (Security Application Module) - Optional
- Step 2 - Inserting the communication card
- Step 3 - Installation of the Access Point
- Step 4 - Connect the printer and fill paper
- Step 5 - Inserting the battery
- Step 6 - Connecting cables
- Step 7 - Installing the charging station - Optional
- Step 8 - Installing the vehicle cradle
- _
- Using the C-ZAM/SMASH Portable
- C-ZAM/SMASH Portable Maintenance
- Troubleshooting
- General safety information for Banksys Products
- Technical Specifications
C-ZAM/SMASH PORTABLE
OWNER’S MANUAL
2. Inspect the shipping container and its contents for damage.
If any of the contents have been damaged, immediately contact your shipping company and
notify your vendor.
Tip: Save the cartons and packing material for repacking or shipping your equipment in the
future.
Getting started with the C-ZAM/SMASH Portable
Step 1 - Installation of the SAM (Security Application Module) - Optional
Specific applications, such as e-purse and debit, use a Security Application Module or Chip
Security Module that is placed in a SAM slot.
1. On the picture below you can see what a SIM card looks like. Note that at one side the
corner is missing, this will be your reference point when properly inserting the SIM card.
Point of reference
2. Turn the terminal with the bottom side facing upwards. Now you can see the inside of
the terminal and the four clamping mechanisms to hold the SAM’s. They should all be
empty; you can install your SIM in any of these slots. Some applications may require that
a SAM be placed in a specific slot. Consult your application provider for further
information.
One of the four
clamping mechanisms
Version: 2.2
10