User's Manual

C-ZAM/SMASH PORTABLE
OWNER’S MANUAL
Installing the C-ZAM/SMASH Portable
A technician or field engineer may help you to install your terminal. If you are installing it
yourself, proceed as described below.
Cautions:
- If you are installing the C-ZAM/SMASH Portable, neither Banksys nor its vendor will bear
any responsibility or cost for malfunctioning, breakdowns or any anomaly that may occur
due to incorrect manipulation or use of the terminal.
- If you notice that any part of the C-ZAM/SMASH Portable does not fit, blocks or shows any
other malfunction, contact your vendor. Do not alter or try to repair it yourself.
- All accessories such as power adapter, battery pack, etc. must be provided by your vendor or
by a Banksys approved source.
- Before proceeding with the installation of your C-ZAM/SMASH Portable, read the safety
recommendations on page 26.
Selecting a location
Ergonomic factors
Select a location for the C-ZAM/SMASH Portable terminal and its accessories that is both
convenient for you and the customer.
Placing the terminal:
- Make sure that the keypad and the display are facing the customer, when handing over the
terminal to the customer or placing the terminal in front of the customer for payment.
- Make sure that the position of the terminal is appropriate for the customer, not too low or too
high.
o For a customer who is sitting down, the appropriate height is the height of a standard
table.
o For a customer who is standing, the appropriate height is at elbow height of the card
holder.
- Check whether there is enough space around the C-ZAM/SMASH Portable terminal to:
o Insert a chip card in the chip card interface.
o Slide a magnetic card through the magnetic strip reader.
- Avoid placement near direct light sources that can hinder the readability of the display or the
keypad.
Version: 2.2
7