User's Manual

YOMOVA countertop owner manual
8 public
last updated 16/2/17 document release 2.2 ymvC_install.fm
4. Put a roll of paper in the printer
5. Connect mains adaptor
Selecting a location
Finding a proper location is an important aspect of installing your YOMOVA. You need to balance
comfort and security. Follow the guidelines below to find a location that is convenient for both you
and your customers.
For a YOMOVA, make sure that:
• the keypad and the display are facing the customer
• the terminal is at an appropriate height for the customer, depending on whether they will be
sitting or standing to use it
• there is enough space (typically 10 cm on all sides) around the terminal, so that it is easy to
read a card or tap a contactless device
• direct light sources do not make it difficult to read the display or the keypad
Make sure that customers have the necessary privacy when entering their PIN code. This means
locating the YOMOVA outside the field of vision of cameras, mirrors and so on.
Make sure you have room to open the cover of the printer and replace the paper.
Installing SAM
Some applications also require one or more SAMs to be installed. The SAM slots are located in
the card compartment on the underside of the YOMOVA.
1. Remove the card cover.
Figure 7. Removing card cover
2. Open the SAM holder: slide the latch towards the hinge until you hear a click, then lift the
2
1