User's Manual

YOMOVA countertop owner manual
10 public
last updated 16/2/17 document release 2.2 ymvC_install.fm
Connecting communications cables
The compartment underneath the YOMOVA gives access to connectors for:
• Ethernet and RS232
• USB device
• PSTN
• power input (mains adaptor)
Special single and combined cables are available to connect the YOMOVA to the power supply,
Ethernet, PSTN, RS232 and/or USB. See the documentation on cables to find the most
appropriate solution.
To connect any of these cables:
1. Open the clips to release the cover of the connector compartment.
2. Lift the cover off the YOMOVA.
Figure 10. Opening the connector compartment
3. Connect cables as required, routing them through the slot at the back of the terminal.
4. Fix the cable to the terminal using the screws provided
Figure 11. Fixing cables to terminal
2
1