User's Manual

18
PRINTING
Problem
Remedy
Make sure that printer was attached
before powering up terminal
Ensure there is adequate paper if not,
replenish.
Check that the paper is not jammed by
lifting cover and inspecting
Ensure that paper roll is installed
correctly, lead edge of paper comes up
from the bottom of paper well towards
the display screen, expose 2 inches of
paper before closing cover
Check that printer cover is closed
correctly
Check that platen (paper roller) and
printer face are clean and unobstructed
Not printing
How do I load new paper roll
Pull printer cover button towards the
front of the terminal then lift cover,
remove old spindle and dispose of, unroll
about 2 inches of paper on a new roll
then inset into printer with paper coming
up from the bottom towards the display
screen exposing the 2 inches of new
paper and close cover