Barcode Reader User Manual

Imager Settings:
Illumination Mode
disable LED illumination
E!B
enable LED illumination default
E!:
LED illumination alternating
E!C
Aiming On/Off
disable laser aiming and LED illumination
E!D
enable laser aiming default
E!E
disable laser aiming
E!F
Central Reading
enable central reading
(read only a code that the laser aims at)
E11
disable central reading
(read the entire image)
default
E1[
1D Code
Decode Mode
careful mode (good for hard to read codes)
EN!
standard mode default
EN3
semi-quick mode
EN2
quick mode (good for easy to read codes)
EN1
LCD Display
Scanning
disable scanning from LCD display default
E!J
enable scanning from LCD display
E!K
Auto Focus
Mode
AF system = laser and contrast default
F9L
AF system = contrast only
F9M
AF system = laser only
F9N
Note: Normally laser ranging is used for reading labels. In case it cannot be used in a brightly-lit
environment, the contrast method is used. When “contrast only” is configured, the reading speed will
be slower.
Fixed Focus
Mode
short range = 90mm
F9O
medium range = 163mm
F9P
long range = 880mm
F9Q
A-49