Specifications

C-2
For all RJ Cable pin numbers, number from
left to right with the metal pin side of the
connector facing you and the cable running
to the down position
Relay Station RS422 Pin-outs
The R/F Relay Stations are connected by twisted pair wire -- use
Belden 1227A1, Cat 5 wire or equivalent. The Relay Port on the Base
Station and the Relay Port on the Relay Station are connected with a
straight cable using the following pin-outs:
Base Connector Pin # Relay Connector
Receive Data + 5 Transmit Data +
Receive Data - 6 Transmit Data -
Transmit Data + 2 Receive Data +
Transmit Data - 3 Receive Data -
Make a cable with 5-5, 6-6, 2-2, and 3-3 (a straight cable); but, be
careful that you select wires so that the 2 wire is in the twisted pair with
the 3 wire, and the 5 wire is in the twisted pair with the 6 wire.
For all RJ Cable pin numbers, number from left to right with the metal
pin side of the connector facing you and the cable running to the down
position