User's Manual

4
enabling reading of .............................................. 2-14
Language problems during data collection ............... 7-1
Laser and CCD Scanners .......................................... L-1
Laser Comparison Chart ........................................... L-1
Laser pin-outs ........................................................... C-3
Laser Scanner options .............................................. L-2
Laser Scanner Options ............................................. 2-20
Laser Scanners........................................................... N-1
LCD
Backlight Setup ..................................................... 2-7
LCD Backlight Display Mode ................................... 2-7
LCD Display Mode ............................................2-7, 6-6
Leading characters
trimming using preamble .................................... 2-15
Leading digits for UPC/EAN ............................... 2-11, J-2
Leading spaces and Accumulate mode .................... E-4
LEFT ARROW key-transmitting ASCII 30 to host 6-12
Length restrictions on bar codes .............................. 2-15
Link Test from base to host ........................................ 2-23
Literacy as a data collection problem ........................ 7-1
LOADER.EXE program to download firmware ...... D-1
Location of Base and Relay ...................................... 4-5
Logic Error ................................................................ 8-3
LOGMARS............................................................... E-1
Longer Laser reading ................................................ L-2
Loose decoding algorithm for Laser scanners ........ 2-13
Low Batteries .....................................................1-5, 8-3
Low Battery message .................................................. 1-5
LZ300 Laser Scanner ............................................... N-2
LZ400 Laser Scanner ............................................... N-2
M
magnetic stripe input ................................................. 6-3
magstripe command .................................................. 6-4
Magstripe input ....................... See Zebra Cameo Printer
data format from Cameo ..................................... 6-34
maintaining backwards compatibility ..................... 2-22
Making terminal beep ................................................ 6-2
Making your own extension cables .......................... C-1
Mapping of voice messages ...................................... 7-2
Maximizing long range laser ................................... 2-20
Menu setup using the keypad .................................... 2-3
message format for host to terminal programming ... 6-1
Metal walls and RF ...................................................... 4-1
Microphone................................................................ 7-3
plugging in to AUX jack ....................................... 7-3
Min/max length checks ........................................... 2-17
Min/max length checks in Preamble ....................... 2-16
mm/dd/yy ................................................................. 2 -18
Modulus 43 Check Characters ................................. E-2
MSI check digits ....................................................... K-1
MSI/Plessey ............................................................. 2-14
multi-dropping additional Relays ............................. B-1
Multiple Base stations - changing channel ................ 1-3
Multiple terminals on a Base ..................................... 4-6
N
New installation troubleshooting .............................. 8-2
New Zealand channels ............................................... 2-6
NiCad batteries
checking jumpers when recharging ....................... 1-6
NSC assignments ........................................................ J-2
NSC characters - enabling transmission ................. 2-11
Null modem cable pin-outs (F34) ............................ C-1
Numeric "Barpad" .................................................... E-4
O
OFF key - hitting it twice .......................................... 5-3
ON/OFF button ......................................................... 1-4
One Way Mode - getting into................................... 1-7
One-Way mode ......................................................... 3-4
adding postamble for ENTER (CR) ...................... 3-5
multiple terminals ................................................. 3-5
using preamble to transmit Terminal ID ............... 3-5
One-Way Mode - brief description of ....................... 3-1
Opening a Base or Relay .......................................... A-1
Operational Theory ................................................... 3-1
Operator Errors .......................................................... 5-3
Optional Features ..................................................... N-1
Organic materials' effect on RF .................................. 4-1
Outputting ASCII characters
in place of actual characters entered ................... 2-17
Outputting data to a serial device from terminal ...... 6-2
P
Parity for RF Terminal ............................................ 2-21
Parity settings to use serial printer .................................... 2-21
Partial data from Base to Relay ................................. 4-4
Partial reads on EAN-13 ......................................... 2-12
Partitions
changing for voice messages ................................ 7-2
for voice messages ................................................ 7-2
Password .................................................................... 2-3
PDF 417 scanners ...................................................... 6-3
Performance Issues .................................................... 4-1
Performing a Site Test ............................................... 4-2
PICK requirements ..................................................... 8-6
Pin-outs ..................................................................... C-1
Zebra Cameo Printer .............................................. C-3
Planning for expansion .............................................. 5-2
Planning for hardware failures .................................. 5-2
Planning for system failures ...................................... 5-1
Playing a voice message on a terminal ..................... 6-2
Playing back a recorded voice message .................... 7-3
Plessey code ............................................................. K-1
Poor lighting situations
suggestions for dealing with ................................. 7-1
poor read rates when scanning bar codes .................. 8-7
Portable Printer Pin-outs for Zebra Cameo .............. C-3
Portable Printers - about the Zebra Cameo Printer . 6-33
portable printing ...................................................... 6-34
Portkey - using with One-Way mode ........................ 3-4
Postamble ................................................................ 2-16
using in One-Way mode to send terminator ......... 3-5
using to check data length in NON PORTABLE
mode ................................................................ 2-17
Postambles and selective trimming ......................... 2-17
powering up base station after programming .......... 2-24
Power-up
6 beeps from terminal ........................................... 8-7
Preamble .................................................................. 2-15
selective trimming ............................................... 2-16
using in One-Way mode to send Terminal ID ...... 3-5
using to check data length ...................................... 2-16
Prefix for bar code types ......................................... 2-12
Press Enter When Ready prompt during Site Test .... 4-2
Preventing another Base from listening ........................ 2-6
Printers - setting Parity to match serial printer ....... 2-21
Problems reading Bar Codes ..................................... 8-7
Problems with a new installation .............................. 8-2
Programming Base to Host formats .......................... 6-7