User's Manual

The groups in the keypad Setup Menu contain the following setup parameters:

Setup Group Parameter Setup Group Parameter

RF Setup RF Terminal ID Date/Time Set Time

0 RF Channel 3 Set Date

Security Code Date Format

Skip opening screens Display of Year

Battery Recharging or Not

Bar Codes Code 3 of 9 4

1 UPC/EAN

Code 2 of 5/I 2 of 5 Speaker Speaker Volume

2 of 5 Length 5 Headphone Volume

Code 128 Beep Tone

Codabar

MSI/ Plessey Other Shut Down Time

Code 11 6 Preamble

Code 93 Postamble

RSS-14 Voice Messages

Laser Options

RS232 Baud Rate

iming Dot Duration

2 Protocol

utomatic Check Back

Parity Control Keys Only

Data Bits LCD Display Mode

Stop Bits LCD Backlight

LCD Backlight Duration

Once you have selected a group to edit, you will see each parameter

displayed in the order listed above. Use the next section of this chapter as a

reference for all RF Terminal Setup Parameters, whether they are

configured using the keypad or the bar coded Setup Menu. Each parameter

is followed by either a key symbol:

and the group you will find the parameter in,

or a bar code symbol:

or both, depending on how the parameter can be configured.

F Setup