User's Manual

Data Bits

7 bits 0

8 bits 1

Stop Bits

1 bit 0

2 bits 1

Protocol

None 0

XON/XOFF 1

Maintain backward compatibility for illegal statement handling E

Illegal statement handling for current versions F

 Settings 0 and 1 pertain to use of a serial Printer with your RF Terminal.

Use setting 1 for XON / XOFF if your serial Printer supports it. It DOES

NOT apply to the Cameo and QL3 Printers.

 Settings E and F pertain to the way the RF Terminal handles illegal

statements coming from the host computer. RF Terminal software

versions prior to 9.059 did not handle illegal statements the same way

as current versions. This setting is really only applicable if you had

written your host program to be compatible with RF Terminal

versions prior to RFT9059.

Base Setup

The Base Setup is only accessible via the RF 7000 Configuration Utility

included on the Utilities CD that came with your RF Terminal. You can also

download the utility from our website at:

http://www.barcodehq.com/utilities/rfserial.exe

Using the RF 7000 Configuration Utility

After you install the Configuration Utility from the CD or from the web,

make sure your Base Station is attached to one of the computer COM ports

using the 9 pin serial cable (F36) or USB cable included with your system

and that the power supply (5v from Worth Data ONLY) is plugged in.

Start the RF 7000 Configuration Utility.

S232