User's Manual

Function: This instructs the terminal attached to client

basename on channel to display the prompt at line

and position and wait for data to be entered from

either terminal keypad or scanner. If shifted is set to

"true", the terminal will start in shifted mode.

Timestamped appends a (hhmmss) prefix to the

returned data.

InputKeyBd

Parameters: basename, channel, terminal, line, position,

prompt, shifted, timestamped

Function: This instructs the terminal attached to client

basename on channel to display the prompt at line

and position and wait for data to be entered from

the terminal keypad only. If shifted is set to "true",

the terminal will start in shifted mode.

Timestamped appends a (hhmmss) prefix to the

returned data.

InputScanner

Parameters: basename, channel, terminal, line, position,

prompt, allowbreakout, timestamped

Function: This instructs the terminal attached to client

basename on channel to display the prompt at line

and position and wait for data to be entered from

the terminal scanner only. Setting allowbreakout to

true allow user to "breakout" of scanner only mode

by pressing the end key on the terminal. A

termID+CR will be sent to the host.

InputYesNo

Parameters: basename, channel, terminal, line, position, prompt

Function: This instructs the terminal attached to client

basename on channel to display the prompt at line

and position and wait for a Yes (Enter key or C

key) or a No (0 key or B key) from the terminal

keypad.

Note: C and B keys are used to facilitate keypad

entry while scanning with the integrated laser.

InputPassword

Parameters: basename, channel, terminal, line, position,

prompt, shifted