User's Manual

InputSerial

Parameters: basename, channel, terminal, line, position, prompt

Function: This instructs the terminal attached to client

basename on channel to display the prompt at line

and position and wait for data to be received

through the terminal serial port. Waiting for serial

input can be bypassed by pressing the enter key on

the terminal which will send an empty data string to

the host (fires the OnTermData event handler).

OutputSerial

Parameters: basename, channel, terminal, data

Function: This instructs the terminal attached to client

basename on channel to send data to the terminal’s

serial port. Data must be less than 231 characters in

length for each call to OutputSerial.

SendDisplay

Parameters: basename, channel, terminal, line, position, prompt

Function: This instructs the terminal attached to client

basename on channel to display the prompt at line

and position. Must be followed by an "Input"

method call to take effect.

ClearScreen

Parameters: basename, channel, terminal

Function: This instructs the terminal attached to client

basename on channel to clear its display. Must be

followed by an "Input" method call to take effect.

ClearLine

Parameters: basename, channel, terminal, line

Function: This instructs the terminal attached to client

basename on channel to clear the specified line on

its display. Must be followed by an "Input" method

call to take effect.