User's Manual

1-8
the terminal is capable of supporting the Zebra Cameo and Encore
portable printers.
To move on to the first menu item, press any key on the R/F Terminal keypad.
The display now reads:
SIGN ON?
KEY [YES/NO]?_
• Press the YES key to SIGN ON to a two-way communication host
computer program through the Base station.
• Press NO to move on to the next menu item:
SETUP MODE?
KEY [YES/NO]?_
• Pressing YES prompts for a password to enter the Setup Mode for
the R/F Terminal or Base station.
• Press NO to move on to:
ONE-WAY?
KEY [YES/NO]?_
• Press YES to enter ONE-WAY mode. ONE-WAY mode allows the
R/F Terminal to transmit data to the host computer without
prompting from the host computer program – we call this “dumb”
data entry. ONE-WAY mode is also useful for demos, as it does
not require any interaction from the host computer.
• Press NO to go to:
SITE TESTING?
KEY [YES/NO]?_
• Press YES to enter SITE TESTING. SITE TESTING is an
excellent way to assess your R/F communication in any area. It can
help you determine the best place to locate your Base station for
maximum R/F performance as well as troubleshoot problems that
may relate to range or interference.
• Press NO to loop back to the SIGN ON? prompt.
You can back-out of any mode or prompt by pressing the F1 key. For
example, if you press YES at the SETUP MODE? prompt but really meant
to press NO, press the F1 key to take you back to the menu. The F1 key on
the R/F Terminal keypad works like the ESC key on the PC – it will usually
get you out and back to the previous step. You can use the F1 key to exit
and SIGN OUT when using a Two-Way communication program running
on the host computer.