User's Manual

B-3
The below diagram illustrates the WRONG way to route your wiring and
use the Y-cables. Sometimes people try to route everything through a panel
or wiring closet – this will not work properly; it will generate excessive data
noise and drag down the responsiveness of the Base and application. (With
too much noise, the Base will stop working and issue a “Base Station
Reinitalized” message to the terminals. If used, such a radial interface as
below might appear to work most of the time, but it would be very sluggish
and crash several times per day. Terminating or not terminating will be of
no help. Do Not cable as below.
Incorrect Routing for Wiring