User's Manual

N-3
This scanner supports the aiming dot mode, useful for difficult aiming and
scanning in bright sunlight.
Durability features include a cable tested to withstand 1,000,000 bends of
operation, as well as a scan engine tested to withstand 2000 G's of force. It
is an extremely rugged product, made to withstand harsh treatment
including repeated drops.
Symbol 3200ER Scanner
This laser is a long-range laser (it reads a 100 mil reflective bar code from up
to 35 ft.), but it also reads normal codes. This makes it ideal for reading
shelves so high you can’t even reach them, (i.e. a forklift operator can scan
the shelves without getting up); but it can still read desktop bar codes at close
range. It actually has two lasers built-in; one for close up reading, and one for
distance reading. It has a two position trigger; the first position stop is an
aiming spot, the second position stop triggers the beam. Warranty is 1 year.
Laser Accessories
B10 Rubber Laser Boot
The B10 Rubber Laser Boot fits both the LZ100 and LZ200 laser
scanners, and the F86 Laser-like CCD scanner. The durable rubber cover
was designed to substantially decrease the chance of damaging a laser or
CCD scanner if dropped.
Install the B10 Rubber Laser Boot by placing the
boot on the windowed end of the laser first, then
pulling the boot toward the back of the Laser
scanner. The H11 Laser Holder can accommodate
the laser with or without the rubber boot.