User's Manual

N-4
H11 Laser Holder
The H11 Laser Holder is for the LZ100 and LZ200 laser scanners as well as
the F86 Laser-like CCD scanner. The holder comes with a removable insert
to allow the holder to be used with Lasers or CCDs using the B10 Rubber
Laser Boot. The H11 Laser Holder can be mounted vertically (wall) or
horizontally (table top). Double-sided tape is included to use for mounting,
or you can use wood or metal screws (not provided) to mount the holder. If
you are not using the B10 rubber boot, do not remove the Laser Holder
insert. If you are using the rubber boot, remove the screw located on the
back of the Laser Holder and remove the insert. The holder is now large
enough to accommodate the laser scanner with the rubber boot.