User's Manual

2-4
The groups in the keypad Setup Menu contain the following setup parameters:
Setup Group Parameter Setup Group Parameter
RF Setup RF Terminal ID RS232 Baud Rate
0 RF Frequency 2 Protocol
Relay Existence Parity
Security Code Data Bits
Frequency Bank Stop Bits
Skip opening screens
Host Response Delay Date/Time Set Time
3 Set Date
Bar
Codes
Code 3 of 9 Date Format
1 UPC/EAN Display of Year
Code 2 of 5/I 2 of 5
2 of 5 Length Speaker Speaker/Batteries
Code 128 4 Beep Tone
Codabar
MSI/ Plessey Other Shut Down Time
Code 11 5 Preamble
Code 93 Postamble
Voice Messages
Laser Options
Arrow Keys Only
LCD Display Mode
LCD Backlight
LCD Backlight Duration
Arrow Keys Only
Once you have selected a group to edit, you will see each parameter displayed in
the order listed above. Use the next section of this chapter as a reference for all
RF Terminal Setup Parameters, whether they are configured using the keypad or
the bar coded Setup Menu. Each parameter is followed by either a key symbol:
and the group you will find the parameter in,
or a bar code symbol:
or both, depending on how the parameter can be configured.
R
F
Setup