User's Manual

2-11
Base Reinitialized
Cycle Power
By default, the RF Terminal automatically determines which type of display
is installed, and sets the LCD Display Mode accordingly.
• The LCD Display Mode should only be changed if you are trying to integrate
a new 6 line display terminal into an existing 4 line display system without
having to change any of your programming. Our suggestion is to change
your program to take advantage of the 6 line display. See the
PROGRAMMING section for details.
LCD Backlight Display Mode (US only)
No 0
Yes 1
Backlight Display is an optional feature that must be specified at time of order.
The default setting is for the LCD Backlight to be OFF. Once you change the
setting to 1 for YES, you need to set the Backlight Duration.
Backlight Duration (US Only)
Always ON 0
Duration in # of seconds 1-9
The Backlight Duration is of no concern unless you have set the LCD
Backlight Display to 1 for YES. This setting determines how long the Backlight
Display is on at startup or when triggered by pressing the F2 key. Always ON
will create a drain on your batteries and you can expect shorter battery life. Your
best bet is to set a time between 1 and 9 seconds and turn it on when you need it
by pressing the F2 key.
Skip Opening Screens
No 0
Go to Two-Way (SIGN ON) 1
Go to One-Way (ONE WAY) 2
• Many users want to skip the opening screens and go directly to SIGN ON or
ONE WAY communication once their programs are fully operational.
Selecting 1 or 2 will automatically take the operator to the corresponding
mode and into your application, skipping the usual Mode Menu (SIGN
ON?Y/N, SETUP?Y/N, ONE WAY?Y/N, SITE TESTING?Y/N). If you
want to return to the Mode Menu at any time, simply press the F1 key.
If your skip the opening screen, you may want to quickly check the settings
R
F
Setup
Other
Other