User's Manual

2-24
Voice Message Partitions
This parameter partitions the total amount of voice messages into different
message lengths. The default setting is:
303015
xx yy zz
where: xx is number of ½ second messages
yy is the number of 1-second messages
zz is the number of 2-second messages
The total time allotted must not exceed 75 seconds. To change the partitions,
scan or enter 6 digits total; 2 for the number of ½-second messages, 2 for the
number of 1-second messages and 2 for the number of 2 second messages. See
the default setting as an example.
WARNING: changing the Voice Message Partitions parameter after you have
recorded messages could result in having to re-record some of them; they would
still be there but longer messages may get cut up and shorter ones combined.
Shut Down Time
By default, if the RF Terminal is inactive (no keystrokes or scanning) for more
than 5 minutes, it will shut itself down in order to conserve batteries. This
includes SIGNING OFF if appropriate. To resume operation, you must turn the
RF Terminal back on using the ON/OFF key. To change the amount of time the
RF Terminal waits before shutting down:
• Scan Shut Down Time
• Scan two digits - the default is 05 (5 minutes)- to correspond to the length
of time in minutes. For example, 01 would be 1 minute.
If you want to prevent the RF Terminal from shutting off automatically at all, set
the Shut Down Time to 00.
Other
Other