User's Manual

2-26
The following serial parameters Baud Rate, Parity, Data Bits, and Stop Bits apply only to
firmware updates and a portable printer such as the Cameo and Encore printers.
Baud Rate
300 0
600 1
1200 2
2400 3
4800 4
9600 5
19,200 6
Parity
None 0
Even 1
Odd 2
• None is generally used with 8 data bits, Even or Odd parity with 7 data bits.
Data Bits
7 bits 0
8 bits 1
Stop Bits
1 bit 0
2 bits 1
Protocol
None 0
XON/XOFF 1
Maintain backward compatibility for illegal statement handling E
Illegal statement handling for current versions F
• Settings 0 and 1 pertain to use of a serial Printer with your RF Terminal.
Use setting 1 for XON / XOFF if your serial Printer supports it.
• Settings E and F pertain to the way the RF Terminal handles illegal
statements coming from the host computer. RF Terminal software versions
prior to 9.059 did not handle illegal statements the same way as current
versions. This setting is really only applicable if you had written your host
program to be compatible with RF Terminal versions prior to 9.059, are
adding current version Terminals to the system, and need to maintain
backwards compatibility.
R
S232
R
S232
R
S232
R
S232
R
S232